Philips VRX360AT owner manual Reviewing or Cancelling Timer Recordings, Press the Menu button

Timer Recording (cont’d) 33

Reviewing or Cancelling Timer Recordings

1

Press the VCR button, then the POWER button to turn on the VCR.

2

Make sure the VCR light appears on the display panel of the VCR. If it does not, press the VCR/TV button.

3

Press the MENU button.

6

4

5

1

POWER VCR TV

1 2 3

4 5 6

7 8 9

VCR PLUS+
/ENTER
	0	+100
SPEED	TIME SEARCH	MUTE

CABLE /DSS

VCR/TV

CHANNEL

VOLUME

2

4

Press the Number 1 button to select PROGRAM.

5

Press the Number 4 button to select PROGRAM REVIEW. The timer recording information for the program in the lowest num- bered slot will appear on-screen. If there are no timer recordings set, nothing will happen when you press the Number 4 button.

6

Press the Number 1 button repeatedly to review all pro- grammed timer recordings. If you don’t press the Number 1 button in 10 seconds, the VCR will automatically display informa- tion about the next programmed timer recording. This will contin- ue until all filled positions have been displayed. Then the menu will disappear.

7

To cancel the timer recording displayed, press the CLEAR button. Either the display will disappear or information about other timer recordings will appear. If you do not press any other buttons, the display will disappear after all timer recordings have been displayed.

8

Repeat steps 3-6 to make sure you have cleared the cor- rect timer recording.

		PLAY
	– REW			F.FWD +
		STOP
3	REC/OTR	MEMORY	SLOW	PAUSE/STILL
	MENU	STATUS/EXIT	CLEAR	EJECT

7

Helpful Hints

•CLASH may flash on the screen when you finish setting a timer recording, then the PROGRAM menu will appear. This means that the timer recording you just pro- grammed and another timer record- ing overlap, and thus the current timer recording will not be carried out. In this case, cancel one of the overlapping timer recordings by fol- lowing the instructions on this page.

•If the preset time for a timer recording comes up during an OTR, the OTR has priority.

•To stop a started timer recording, press the STOP/EJECT button on the VCR.

•If the power fails for more than one minute, programmed timer record- ings will be lost. If this occurs, reset

the VCR’s clock before re-program- ming the timer recording(s).

See page 48 for more notes.