Philips VRZ264, VRZ244 owner manual Display Panel

VRZ264 4/8/99 7:29 PM Page 22

22 Display Panel

VCR Display Panel

Information about VCR operations appears here. Different information appears at differ- ent times. The display is brighter when the VCR power is on. The display dims automati- cally when you turn off the VCR power.

Cassette Compartment

Remote Sensor

Receives a signal from your remote control so you can operate your VCR from a distance. Press the VCR button on the remote control before pressing other VCR operation buttons.

Insert a tape here.

POWER STILL/

PAUSE

19∝m	Hi-Fi
		MENU/EXIT
		/OK
	VIDEO L AUDIO R	SP SLP
lingual		VCR

REW	FF
STOP/EJECT	PLAY
CHANNEL
REC/OTR	HQ

TIMER Light

This light appears when a timer recording is pro- grammed or is in progress. Details are on pages 34 - 39. This light blinks rapidly if the VCR is turned off to set a Timer Recording but a tape is not in the VCR.

		SP SLP
			VCR
	Operation indicators			Clock/Counter/Channel Display
These indicators tell you the				Each time you press the EXIT/STATUS button,
current operation of the VCR.				information on the display panel will change.
3: Play, Forward and Reverse				When tape playback is stopped, press the
	Searching			EXIT/STATUS button repeatedly to see: the cur-
\: Record				rent time (when the clock is set); the real-time
\I: Record Pause				counter; and the current channel number. During
3I: Still Picture				tape playback, press the EXIT/STATUS button
Tape Speed Lights				repeatedly to see the real-time counter or the
				current time.
This light indicates the current
				Line Input Mode Light
tape speed. This VCR will play
				When L appears here, the VCR is in Line Input
tapes recorded in LP speed, but
				mode. When L-F appears, you have selected A/V
LP will not appear on the display
				IN FRONT. Your audio and video cables should
panel. This VCR will not record in
				be connected to the AUDIO/VIDEO jacks on the
LP speed. Details on tape speeds
				front of the VCR if you are dubbing tapes. When
are on pages 37 and 50.
				L-1 appears here, you have selected A/V IN REAR.
VCR Light
				Your audio and video cables should be connected
This light appears when the VCR is				to the AUDIO/VIDEO jacks on the back of the
				VCR if you are dubbing tapes. To select A/V IN
in VCR position.
				FRONT or A/V IN REAR, press 0,0, then press
Cassette-Inside Light
				the CH(annel) 8/9 buttons so that A/V IN
This light appears when a tape is in the VCR. It				FRONT or A/V IN REAR appears on-screen
blinks when a tape is being ejected. This light blinks				briefly. To exit Line Input mode, press the
rapidly if the VCR is turned off to set a Timer				Number buttons or the CH(annel) 8/9 buttons
Recording but there is not a tape in the VCR.				to select another channel.