VRZ264 4/8/99 7:29 PM Page 33
Setting Up the VCR Plus+ Programming System (cont’d) 33
2
Now, compare the channel numbers you have written into the VCR PLUS+ CH. and CABLE/TV CH. columns. You’ll notice that some stations have VCR Plus+ and Cable/TV channel numbers that are the same, and other stations have channel numbers that do not match. You must tell the VCR Plus+ and Cable/TV channel numbers according to the following steps.
3
Press the VCR button, then press the MENU button.
4
Press the PLAY 8 or STOP 9 button to select INITIAL SET UP, then press the :/OK button.
5
Press the PLAY 8 or STOP 9 button to select VCR PLUS+ CH., then press the :/OK button.
SET VCR PLUS+ CH.
VCR PLUS+ | CABLE/TV | |
99 |
| – – – |
01 | – – – | – – – |
02 | – – – | |
03 |
| – – – |
04– – –
SELECT ,9 OR ENTER VCR+ CH. NO. THEN PUSH :/OK
TO END PUSH EXIT
6
While the VCR PLUS+ channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the
Number buttons to select a VCR PLUS+ channel number. The arrow will appear beside the VCR PLUS+ channel. Press the :/OK button.
2Examine the lists on page 32. | ||||||
3 CBL/DBS | TV |
| VCR |
| ||
| VCR/TV POWER |
| EJECT | |||
| VOL | SKIP SEARCH | CH | |||
|
| STILL/SLOW |
|
| ||
|
|
| PLAY |
| /OK |
|
|
|
| STOP |
|
|
|
| SLOW/BACK |
|
| SLOW/ |
| |
|
| FORWARD |
| |||
8 | – |
|
|
| + |
|
EXIT/STATUS | MENU |
| TIMER |
| ||
QUICK PROGRAMMING | ||||||
1 | + | 2 | + | 3 | ||
| START |
| STOP |
| DATE | |
| 4 | – | 5 | – | 6 | |
| DBS |
| DAILY |
| WEEKLY | |
| 7 |
| 8 |
| 9 |
|
| SPEED |
| 0 |
| CLEAR |
|
| REC /OTR |
| INDEX |
| AUDIO/MUTE |
|
7
While the space for the CABLE/TV channel is flashing, press the PLAY 8 or STOP 9 button repeatedly or press the Number buttons to enter the CABLE/TV channel number. Press the :/OK button.
Repeat steps 6 - 7 until you have entered all the channels on your list.
8