Automatic Channel Setup 11
5Wait for the VCR to set up
channels.
Although your VCR may automatically memorize the channels you
receive when you turn it on for the first time, this function lets
you set up channels again. Make each entry within one minute of
the previous entry.
5
Wait for a few minutes while the VCR sets up channels.
When programming is complete, AUTO CH. SET COMPLETED
will appear on-screen. Then, the programming of the lowest chan-
nel number placed in the VCR’s memory will appear on-screen.
Now when you press the CH(annel) 8/9buttons, you will scan
only through channels you receive.
1
Press the VCR button, then press the MENU button.
2
Press the PLAY 8or STOP 9button to select TUNER
SET UP, then press the :/OK button.
3
Press the :/OK button repeatedly so that ANT (if you
have an antenna) or CABLE (if you have a cable connec-
tion) appears beside CABLE/ANTENNA.
4
Press the STOP 9button to select AUTO CH. PRO-
GRAMMING, then press the :/OK button. AUTOCH. SET
PROCEEDING PLEASE WAIT and a scale that shows the progress
of channel setup will appear on-screen. The VCR will memorize all
the channels you receive.
• If the channel you select has no
broadcast, the screen will be solid
blue.
• The two Line Input modes will
always be stored in the VCR’s mem-
ory at channel 00. To select A/V IN
FRONT or A/V IN REAR, press 0,0,
then press the CH(annel) 8/9but-
tons so that A/V IN FRONT or A/V
IN REAR appears on-screen briefly.
To exit Line Input mode, use the
CH(annel) 8/9buttons to select a
channel other than 00.
Helpful Hints
SELECT ,9 CHOOSE :/OK
ACABLE/ANTENNA CABLE
AUTO CH. PROGRAMMING
ADD/DELETE CH.
TO END PUSH EXIT
SELECT ,9 CHOOSE :/OK
AVCR SET UP
TUNER SET UP
INITIAL SET UP
TO END PUSH EXIT
2
3
1
4
POWER
CBL/DBS
TV VCR
VCR/TV EJECT
MENU
QUICK PROGRAMMING
EXIT/STATUS
TIMER
SLOW/BACK SLOW/
FORWARD
SKIP SEARCH
STILL/SLOW
1 2 3
4 5 6
7 8 9
0
CLEARSPEED
AUDIO/MUTE
INDEX
START
+
+
–
–
+
–
STOP DATE
DBS DAILY WEEKLY
STOP
/OK
PLAY
VOL CH
/OTR
REC
VRZ264 4/8/99 7:28 PM Page 11