Philips VRZ244, VRZ264 Complete steps 6 7 on, Press the EXIT/STATUS button. Program WAS COM

VRZ264 4/8/99 7:29 PM Page 35

Timer Recording With the VCR Plus+ Programming System (cont’d) 35

5	9	CBL/DBS	TV	VCR
Press the :/OK button. If the VCR PLUS+ and CABLE/TV
channel lists appear on-screen, the CABLE/TV channel has not
		VCR/TV	POWER	EJECT
been set for the VCR PLUS+ channel of the program you have set
in step 4. Complete steps 6 - 7 on page 33.		VOL SKIP SEARCH			CH

6

•If you want to record the program one time only, go to step 7. You may also press the Number 8/DAILY or 9/WEEK- LY button repeatedly to select a ONE TIME PROGRAM.

•If you want to record the program daily, press the Number 8/DAILY button. The VCR will record a program every day from Monday through Friday, starting at the same time and recording for the same length of time.

•If you want to record the program every week, press the Number 9/WEEKLY button. The VCR will record a program on the same day, at the same time, for the same length of time every week.

DAILY PROGRAM (MON-FRI)

PROGRAM	1
CHANNEL +/– 12
START +/–	08:00	PM
STOP +/–	10:00	PM
REC SPEED	SP
DATE +/–	07/31/98
	FRIDAY

SET DAILY=8 OR WEEKLY=9

TO END PUSH EXIT

7

Press the SPEED button to select the tape speed. The selected tape speed, SP or SLP, will appear beside REC SPEED.

8

7

STILL/SLOW
PLAY	/OK	5
STOP

SLOW/

SLOW/BACKFORWARD

–+

EXIT/STATUS MENU TIMER

QUICK PROGRAMMING

1 + 2 + 3

START STOP DATE

4 – 5 – 6

DBS	DAILY	WEEKLY	6
7	0	9
	8
SPEED		CLEAR
REC /OTR	INDEX	AUDIO/MUTE

8

Press the EXIT/STATUS button. PROGRAM WAS COM-

PLETED/PLEASE TURN OFF VCR FOR TIMER RECORDING should appear on the screen. (If PROGRAM NOT COMPLETED appears, begin again from step 1.) After five seconds, the on- screen display will disappear.

9

Press the POWER button to turn off the VCR. The VCR must be turned off for a timer recording to take place.

The r light will appear on the display panel. The r light and the Cassette-Inside light will flash when you turn off the VCR if there is not a tape in the VCR.

The VCR must be off for a timer

recording to take place!

Make sure a tape is in the VCR.

Helpful Hints

•Do not select DAILY at step 6 if the VCR Plus+ recording you chose is on a Saturday or Sunday. The recording will not occur, even though the VCR may accept the way you pro- grammed the recording.

•To exit the VCR Plus+ programming system at any step, press the EXIT/STATUS button.

•PROGRAM NOT COMPLETED/ CLASH may appear on-screen for five seconds at step 8 if the timer recording you programmed overlaps with another timer recording. To cancel the overlapping timer record- ing, follow the steps on page 39.

•If you want to check your timer recordings, follow the steps on page 39.