Philips XL340 Select a base, Base selection Index Number, Un-register a handset, Reset your phone

2Enter 51. Press and hold until you see BASE?.

3Select the base using the digit keys (1, 2, 3 or

4). Press and hold to confirm.

4If you see PIN?, enter the system PIN

(default 0000). Press and hold until you see SEARCHING....

5Press and hold on the base unit for 3 seconds.

•The base will turn on the LED for 30 seconds.

•If registration is successful, handset will show

REGISTERED.

Note

If registration was not successful, the handset will show FAILED. Repeat the above procedures and try again.

5.3.2 Select a base

If your handset is registered to more than 1 base, you can select which base the handset will use. You can choose a fixed base or you can allow the handset to automatically search for a nearby available base (AUTO base selection).

In standby mode:

1Press and hold until you see MENU?.

2Enter the base index number (see below).

3Press and hold to confirm.

•If successful, handset will show the selected base. Otherwise, handset will show FAILED.

Base selection	Index Number
BASE 1	64
BASE 2	65
BASE 3	66
BASE 4	67
AUTO	68

5.3.3 Un-register a handset

A handset can un-register another handset registered to the same base station. It cannot un- register itself.

In standby mode:

1 Press and hold until you see MENU?.

2Enter 52. Press and hold until you see HANDSET?.

3Enter the number of the handset you want to

unregister. Press and hold to confirm.

4If you see PIN?, enter the system PIN (default 0000).

5Press and hold to confirm.

•If un-registration is successful, your handset will show DELETED.

5.3.4 Change the system PIN

A PIN (Personal Identification Number) is required to register and un-register a handset. The factory preset PIN is 0000. You can change it to a unique one of your own. PIN can be up to 8 digits long.

In standby mode:

1Press and hold until you see MENU?.

2Enter 50. Press and hold until you see PIN?.

3Enter the system PIN. Press and hold until you see NEW PIN?.

4Enter the new PIN. Press and hold until you see REPEAT PIN?.

5Enter the new PIN again for verification.

Press and hold to confirm.

•If PIN is changed successfully, handset will show SAVED.

Note

The default product PIN code is preset to 0000. If you change this PIN code, keep the PIN details in a safe place where you have easy access to them. Do not lose the PIN code.

5.3.5 Reset your phone

You can reset your phone to factory settings. To find out what settings are being reset, see page 18.

In standby mode:

1Press and hold until you see MENU?.

2Enter 01 if you want to delete all the

memories.

OR

2Enter 02 if you want to keep the memories unchanged.

Use more of your phone 15