63

PicoScope 6 User Guide

9Reference

This is where you can find detailed information on the workings of PicoScope.

Measurement types

Trigger timing 65 Keyboard shortcuts

Glossary 68

63

67

9.1Measurement types

The Edit Measurement dialog 26 allows you to select one of a range of measurements that PicoScope can calculate for the selected waveform. Here is a list of the available measurements:

AC Volts:The root mean square (RMS) value of the AC component of the waveform. This measurement subtracts any DC offset from the waveform. It is equivalent to a ripple measurement.

Burn Time: For a secondary ignition waveform, the duration of the spark.

Burn Voltage: For a secondary ignition waveform, the voltage across the spark gap during the burn time.

Crank RPM: The turning rate of the crankshaft, as measured by the crankshaft sensor. Expressed in revolutions per minute.

Cycle Time:PicoScope will attempt to find a repeated pattern in the waveform and measure the duration of one cycle.

DC Volts:The mean value of the waveform.

Duty Cycle:The amount of time that a signal spends above its mean value, expressed as a percentage of the signal period. A duty cycle of 50% means that the high time is equal to the low time.

Dwell Angle: In a primary ignition waveform, dwell time converted to an angle, using the formula:

dwell angle = (dwell time * crankshaft RPM / 60) * 360 degrees.

Dwell Time: In a primary ignition waveform, the time during which battery current flows in the ignition coil, as the magnetic field builds up in its winding.

Fall Time:The time the signal takes to fall from 80% to 20% of its peak values.

Falling Rate: The rate at which the signal voltage falls, in signal units per second. Measured between 80% and 20% of its peak-to-peak value.

Frequency:The number of cycles of the waveform per second.

High Pulse Width: The amount of time that the signal spends above its mean value.

PSW044-2.0

Copyright 2006 Pico Technology Limited. All rights reserved.

Page 66
Image 66
Pico Macom PSW044-2.0 manual Reference, Measurement types

PSW044-2.0 specifications

The Pico Macom PSW044-2.0 is a versatile and efficient satellite signal splitter designed for seamless distribution of satellite signals in residential and commercial settings. This innovative device stands out for its exceptional performance, solid build quality, and user-friendly features, making it a reliable choice for installers and system integrators.

One of the main features of the PSW044-2.0 is its four-way signal distribution capability, allowing users to connect multiple devices such as satellite receivers, DVRs, or televisions to a single satellite dish. This is particularly beneficial in multi-room setups where each room may require access to satellite signal without the need for multiple dishes. The splitter effectively reduces the clutter of additional cables while maintaining signal integrity.

The PSW044-2.0 is built on advanced technologies that ensure minimal signal loss and high-frequency stability. Featuring a wide frequency range from 5 MHz to 2300 MHz, this splitter is compatible with a broad range of satellite frequencies, including both standard and high-definition signals. This makes it an ideal choice for modern homes equipped with advanced satellite systems.

Another characteristic that sets the Pico Macom PSW044-2.0 apart is its robust construction. The device is engineered with high-quality materials to enhance durability and longevity. Its compact design makes it easy to install in tight spaces, while the LED indicators facilitate monitoring of signal transmission.

For enhanced performance, the PSW044-2.0 incorporates advanced isolation techniques that prevent signal interference between outputs. This ensures that connected devices can operate without cross-talk, which is crucial for clear and uninterrupted viewing experiences. Additionally, the splitter is designed to handle varying line voltages and has built-in surge protection to safeguard connected equipment from electrical surges.

Overall, the Pico Macom PSW044-2.0 is a sophisticated solution for anyone needing to distribute satellite signals efficiently and effectively. With its combination of high performance, durability, and user-friendly features, it significantly enhances the satellite signal distribution experience, making it a valuable component in any satellite communication setup.