1.Installation is allowed only by a licensed, bonded heating contractor.
2.Install this furnace in accordance with local mechanical codes and regulations.
3.Consult manual “J” of the air conditioning contractors Association (ACCA) or air 230 to estimate heating requirements.
4.Always install this furnace with adequate return and supply duct systems.
5.The installer must explain in detail, the operations of this furnace to owner/operator, including minor service requirements.
6.Never block or restrict any air intake ports. Dangerous overheating can result.
7.Install this furnace with safe clearances to combustible surfaces.
8.Connect this furnace to its own independent Class L Chimney at least 4 inches in diameter.
9.This is a good furnace, but it cannot make up for a poor or incorrect installation.
10.Repair should be done only by a qualified service person.
11.Never stack or pile combustible materials against the furnace.
12.Never use, store or dispose of flammable liquids near the furnace.
13.Always have a smoke or ionization detector installed in your home.
14.Disclaimer notice: No guarantee is made regarding the heating capacity of this unit. The actual area that this unit will heat depends on factors such as conditions of the building, heat loss, type of construction, the amount of insulation, type of air movement, and the location of the furnace.
15.The manufacturer accepts no responsibility for improper installation of this pellet/corn furnace or improper use or negligence of any kind with continued use of the furnace.
16.The manufacturer recommends fuelling this furnace with premium wood based pelletized fuel with moisture content between 2 – 8% or
17.If this furnace runs out of fuel, or misfires, it will automatically
18.Do not operate this furnace with door open.
4