Component Parts and Features

7Display Unit
10
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
Key Finder
1Signal receptor
This receiver receives signals from the
remote control supplied with the
Pioneer Navigation unit and other AV
equipment.
2Ambient light sensor
Senses ambient light. This system auto-
matically adjusts the brightness of the
display to compensate for ambient
light.
3SOURCE/POWER button
Switches between sources and switches
power ON/OFF.
4WIDE button
Changes the method of enlarging 4:3
video to 16:9 video.
5Volume control (–/+) buttons
Adjust the volume of the built-in
speaker 0.
Note:
• Never set the volume so high that you
cannot hear outside traffic and emergency
vehicles.
6NAVI/AV button
Switches the display to the desired
indications. Use to switch between
navigation images and the images of
each source.
7NAVI button
You press this button to view
Navigation Map or return to guidance.
Also, when the map is scrolled, press-
ing this button returns to the display of
the map of your surroundings.
8NAVI MENU button
Pressing this button displays
Navigation Menu.
9MENU-ENTER button
(5/∞/2/3buttons)
Use to switch to operate the setup
menu for various settings.
0Built-in speaker
Outputs sound from audio equipment
connected to this product.