Pioneer AVD-W6210 owner manual Polarity, Confirm the safety and get into reverse gear

Operating the Setup Menu

Functions for Back-up Camera

7Automatic Switching for Back-up Camera

Using a commercially available back-up camera with the proper setting, this product auto- matically switches to the back-up camera image when the gear shift is moved to the REVERSE (R) position. For more information, consult your dealer or the nearest autho- rized Pioneer service facility.

CAUTION

This function is designed for use with a back-up camera only. Users may connect the AV IN2 input with “REVERSE-GEAR SIGNAL INPUT” only to a back-up camera. Users must not connect any other devices to the AV IN2 input with “REVERSE-GEAR SIGNAL INPUT”.

1.Display the setup menu and select [VIDEO SETTING]. (Refer to page 15.)

2.Select [BACK-UP CAM] for AV IN2. (Refer to the previous page.)

3.Press 5 or ∞ to select [POLARITY].

4.Select [BATTERY] or [GND].

V I DEO SE T T I NG

AV I N2	BACK - UP		CAM
REAR SOURCE		SOURCE
POLAR I T Y		BAT TERY
P I CTURE	AD J UST
		SET	UP
P I CTURE MODE		ST D	I MG
RETURN

[POLARITY]

[BATTERY]: When the gear shift is moved to the REVERSE (R) position, and the polari- ty of the connected lead wire (refer to page 31) is positive.

[GND]: When the gear shift is moved to the REVERSE (R) position, and the polarity of the connected lead wire (refer to page 31) is negative.

5.Confirm the safety and get into reverse gear.

Verify that the back-up camera image appears on the screen when the gear shift is in the REVERSE (R) position.

To return to the previous screen, move the gear shift in any position besides REVERSE

(R) or just press the NAVI/AV button.

Note:

•If the back-up camera image appears without getting into reverse gear, the setting for [POLARITY] may be wrong. In that case, try another setting and verify the automatic switching again.

•The initial setting for [POLARITY] is [BATTERY].

19