21
Audio Setting
7[GUIDE]
This setting controls whether the volume of each source is automatically muted during
voice guidance.
Setting the Mixing of the Guidance Voice [GUIDE]
When connecting the Pioneer Navigation unit to the 26-pin input of this hide-away unit,
you can select three types of setting for the guidance voice from the Pioneer Navigation
unit.
1. Display the setup menu and select [AUDIO SETTING]. (Refer to page 15.)
2. Select a desired setting.
Pressing 2/3will switch between [ATT] (attenuation), [MUTE] (muting) and
[NORMAL] (normal).
[ATT] : Volume is set to 1/4.
[MUTE] : Volume is turned to 0.
[NORMAL] : Volume remains the same.
7[SPEAKER]
You can select [ON] or [OFF] for the audio from the built-in speaker.
Note:
• You can hear the Navigation voice guidance even if you select [OFF] for the audio from the built-in
speaker.
Operating the Setup Menu