Initially,the unit is set for rear full-range speak-
erconnection (FULL). When rear output is
connectedto full range speakers (when FULL
isselected), you can connect the RCA sub-
wooferoutput to a subwoofer. In this case, you
canselect whether to use the subwoofer con-
trollers (low pass filter,phase) built-in SUB.W
orthe auxiliary FULL.
!Whenthe multi-channel processor (e.g.,
DEQ-P8000)is connected to this unit, you
cannotoperate this function.
1 TouchA.MENU and INITIAL and then
touchREAR SPEAKER.
2 Touch or to switch the rear out-
putsetting.
Touch toselect full-range speaker and
FULLappears in the display. Touch to select
subwooferand SUB. W appears in the display.
#Whenno subwoofer is connected to the rear
output,select FULL.
#Whena subwoofer is connected to the rear
output,set for subwoofer SUB. W.
#Whenthe rear output setting is SUB. W, you
cannotchange the subwoofer controller.
3 Touch or to switch the subwoofer
outputor non fading output.
Touch toselect subwoofer output and
SUB.Wappears in the display. Touch to se-
lectnon fading output and FULL appears in
thedisplay.
Notes
!Evenif you change this setting, there is no
outputunless you turn the nonfading output
(referto Using nonfading output on page 69)
orsubwoofer output (refer to Using subwoofer
outputon page 69) in the audio menu on.
!Ifyou change the subwoofer controller, sub-
wooferoutput and nonfading output in the
audiomenu return to the factory settings.
!Bothrear speaker leads output and RCA rear
outputare switched simultaneously in this
setting.
Correcting distorted sound
Youcan minimize distortion that may be
causedby the equalizer curve settings.
Settingan equalizer level high can cause dis-
tortion.If high sound is crippled ordistorted,
tryswitching to LOW. Normally, leave the set-
tingat HIGH to ensure quality sound.
!Onlywhen the multi-channel processor
(e.g.,DEQ-P8000) is connected to this unit,
youcan operate this function.
1 TouchA.MENU and INITIAL and then
touchDIGITAL ATT.
2 Touch or to switch the digital at-
tenuatorsetting.
Touch toselect low setting and LOW ap-
pearsin the display. Touch to select high
settingand HIGH appears in the display.
Switching the soundmuting/attenuation
Soundfrom this system is muted, attenuated
ormixed automatically in the following cases:
!Whena call is made or received using a
cellulartelephone connected to this unit.
!Whenthe voice guidance is output from a
Pioneernavigation unit connected to this
unit.
1 TouchA.MENU and INITIAL and then
touchTEL/GUIDE.
Initial Settings
En
90
Section
17