Setting angle icon display
Youcan set it up so that the angle icon ap-
pearson scenes where the angle can be
switched.
1 TouchSETUP and VISUAL and then
touchMULTI ANGLE.
2 Touchato turn angle icon display on.
#Toturn angle icon display off, touch b.
Setting the aspect ratio
Thereare two kinds of display. A wide screen
displayhas awidth-to-height ratio(TV aspect)
of16:9, while a regular display has a TV aspect
of4:3. Besure toselect thecorrect TVaspect
forthe display connected to REAR MONITOR
OUT.
!Whenusing a regular display, select either
LETTERBOX or PANSCAN. Selecting 16: 9
mayresult in an unnatural picture.
!Ifyou select the TV aspect, the units dis-
playchanges to the same setting.
1 TouchSETUP and VISUAL and then
touchTV ASPECT.
2 Touchany of the following touch panel
keysto selectthe TVaspect.
!16: 9 Widescreen picture (16:9) is dis-
playedas it is (initial setting)
!LETTERBOX The picture is the shape of a
letterboxwith black bands at the top and
bottomof the screen
!PANSCANThe picture is cut short at the
rightand left of the screen
Notes
!Whenplaying discs that do not specify
PANSCAN,playback is with LETTER BOX
evenif you select PANSCAN setting. Confirm
whetherthe disc package bears the 16 : 9 LB
mark.(See page 13.)
!Somediscs do not enable changing of the TV
aspect.For details, refer to the discsin-
structions.
Setting the parental lock
SomeDVD video discs let you use parental
lockto restrict the viewing of violent and adult-
orientedscenes by children. You can set the
parentallock level in steps as desired.
!Whenyou set a parental lock level and then
playa disc featuring parental lock, code
numberinput indications may be dis-
played.In this case, playback will begin
whenthe correct code number is input.

Setting the code number and level

Whenyou first use this function, register your
codenumber. If you do not register a code
number,parental lock will not operate.
1 TouchSETUP and VISUAL and then
touchPARENTAL.
2 Touch09 to input a four digit code
number.
3 Whilethe inputted number is dis-
played,touch ENTER.
Thecode number is set, and you can now set
thelevel.
4 Touchany of 18 to select the desired
level.
Theparental lock level is set.
!LEVEL8 Playback of the entire disc is pos-
sible(initial setting)
!LEVEL7LEVEL 2 Playback of discs for
childrenand non-adult-oriented discs is
possible
Setting up the DVD player
En
86
Section
16