This product
Note:
Cords for this product and those for other products may be different colors even if they have the same function. When connecting this product to another product, refer to the sup- plied Installation manuals of both products and connect cords that have the same func- tion.
Power cord
Black, Orange/white, Red, Yellow
☞ See Page 13.
Yellow/black
When combining this navigation unit with a Pioneer car stereo, if the car stereo has yellow/black leads, connect them to those leads. In this way, when the guidance audio is output and when you operate the system by voice, the car stereo is automatically muted to reduce the car stereo volume.
ENGLISH ESPAÑOL DEUTSCH
Purple/white (REVERSEGEAR SIGNAL INPUT) | Connection method | |
This is connected so that the navigation system can | ||
| ||
detect whether the car is moving forwards or back- | Clamp the backup lamp | |
wards. Connect the purple/white lead to the lead | ||
lead. | ||
whose voltage changes when the shift lever is put | ||
| ||
in reverse. Unless connected, the sensor may not |
| |
detect your car traveling forward/backward proper- | Clamp firmly with | |
ly, and thus the position of your car detected by the | ||
sensor may be misaligned from the actual position. | ||
| ||
Note: When you use the |
| |
erator (sold separately), please make sure to con- | Backup lamp lead. | |
nect it. | ||
Fuse resistor |
| |
Check the position of your car’s backup |
| |
lamp (the one that lights up when the |
| |
shift lever is in reverse [R]) and find the |
| |
backup lamp lead in the trunk. |
|
FRANÇAIS ITALIANO NEDERLANDS
12
