Parts supplied
When installing the antenna inside the vehicle (on the rear shelf)Affix the metal sheet on as level a surface as possible where the GPS antenna faces the
window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened with its
magnet.)
Notes:
•When attaching the metal sheet, do not cut it into small pieces.
•Some models use window glass that does not allow signals from GPS satellites to pass through. On
such models, install the GPS antenna on the outside of the vehicle.
MetalSheet
Peeloff the protective sheet
onthe rear.
GPSantenna
Makesure the surface is
freeof moisture, dust,
grime,oil, etc., before
affixingthe metal sheet.
Note:The metal sheet
containsa strong adhesive
which may leave a mark on
the surface if it is removed.
Clamps
Useclamps to secure the
leadwhere necessary inside
thevehicle.
Waterproof padClamp (5 pcs.)Metal sheetGPS antenna
24
ENG/MASTER 96
Italiano
<CRD4067A/U> 25
CRD4067A_U_inst_001_027_US 10/24/05 19:49 Page 25