04 | Chapter 4 |
Playback |
Playing discs or files
This section describes the player’s main operations.
For the types of discs that can be played, see Playable discs on page 8. For the types of files that can be played, see Playable files on page 10. Music files recorded on discs are played with Home Media Gallery (page 34).
1Press STANDBY/ON to turn on the power. Turn the TV’s power on and switch its input beforehand.
STANDBY/ON | OPEN/CLOSE |
T V CONTROL
INPUTCHVOL
SELECT
2Press OPEN/CLOSE to open the disc tray and load the disc.
STANDBY/ON | OPEN/CLOSE |
T V CONTROL
INPUTCHVOL
SELECT
Note
• Load the disc with the printed side facing up.
• Several dozen seconds are required to read the disc. Once reading is completed, the type of disc is displayed on the player’s front panel display.
3 Press PLAY to play the disc.
| PLAY |
|
|
PREV | PAUSE | STOP | NEXT |
RED | GREEN | BLUE | YELLOW |
To pause, press PAUSE during playback.
To stop, press STOP during playback.
Note
•Some discs start playing automatically when the disc tray is closed.
•
•For some
If the disc menu is displayed
For some discs, the disc menu is displayed automatically when playback starts. The contents of the disc menu and the way to operate differ from disc to disc.
26
Resuming playback from where it was stopped (resume playback function)
•When STOP is pressed during playback, the point at which the disc stopped is stored in the memory. When PLAY is pressed, playback resumes from that point.
•For CDs and music files, playback starts from the beginning of the track/file that was playing.
•To cancel the resume playback function, press STOP while playback is stopped.
Note
•The resume playback function is canceled automatically in the following cases:
–When the disc tray is opened.
–When the file list window is switched.
–When the power is turned off. (For BDs and DVDs this does not cancel the resume playback function.)
•The resume playback function cannot be used for some discs.
Forward and reverse scanning
BD
DVD Music files
AVCHD
CD
1 During playback, press or .
PLAY
PREV | PAUSE | STOP | NEXT |
•The scanning speed switches each time the button is pressed. The speed steps depend on the disc or file (the speed is displayed on the TV screen).
•Forward or reverse scanning is also possible by holding the button down. Normal playback resumes when the button is released.
Note
•No sound is output when scanning BDs and DVDs.
•Sound is output when scanning CDs and music files.
•For some discs, normal playback resumes automatically when the chapter switches.
To resume normal playback
Press PLAY.
En
