Pioneer BDP-53FD BDP-53FD,  BDP-52FD

Connecting a TV

See Connecting an AV receiver or amplifier on the right column to connect an AV receiver or amplifier using an HDMI cable.

Caution

•Hold the plug when connecting and disconnecting the cable.

•Placing a load on the plug could result in faulty contact and no video signals being output.

BDP-53FD

Connect a TV to the HDMI OUT (MAIN) terminal.

BDP-53FD’s rear panel

 BDP-52FD	02
	BDP-52FD’s rear panel

cableHDMI (commercially available)		Match the direction of
		the plug to the terminal
	To HDMI	and insert straight.
	input terminal It is also possible to connect to an
		AV receiver or amplifier using an
		HDMI cable (below).
	TV	Direction of signal flow

cable HDMI (commercially available)

To HDMI input terminal

Match the direction of the plug to the terminal and insert straight.

It is also possible to connect to an AV receiver or amplifier using an HDMI cable (on the right column).

Connecting an AV receiver or amplifier

Connect to an AV receiver or amplifier in order to enjoy the surround sound of Dolby TrueHD, Dolby Digital Plus, Dolby Digital, DTS-HD Master Audio, DTS-HD High Resolution Audio or DTS Digital Surround. For instructions on connecting the TV and speakers to the AV receiver or amplifier, refer to the operating instructions for AV receiver or amplifier.

TV

Direction of signal flow

Caution

It is also possible to connect a TV via AV reciever or amplifier to HDMI OUT (MAIN) terminal. See Connecting an AV receiver or amplifier on the right column.

Caution

•Make sure to connect a TV to HDMI OUT (MAIN) terminal, video signals cannot be output from HDMI OUT (SUB) terminal.

•Make sure to set HDMI Mode to Single (page 43).

•Hold the plug when connecting and disconnecting the cable.

•Placing a load on the plug could result in faulty contact and no video signals being output.

19

En