Pioneer BDP-53FD manual 42

07	Audio	Setting	Options
		Digital Output	PCM
	Output		Bitstream
			Off
			Re-encode
		DTS Downmix (BDP-53FD)	Stereo
			Lt/Rt
		Downsampling	48k
			96k
			192k
		DRC (Dynamic Range	Off

Control)	On
* Only Dolby digital and
analog audio signals are
supported.	Auto

42

Explanation

Select this to output digital audio signals directly.

Select this to output digital audio signals converted to PCM audio signals.

Select this to output digital audio signals converted to DTS Digital Surround.

Select this to output audio signals other than digital audio signals.

DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital Surround audio signals converted to linear PCM audio signals are converted into 2-channel (stereo) signals for output.

DTS-HD Master Audio signals, DTS-HD High Resolution Audio signals or DTS Digital Surround audio signals converted to linear PCM audio signals are converted into 2-channel signals compatible with Dolby Surround for output (when the connected AV receiver or amplifier, etc., is compatible with Dolby Pro Logic, the AV receiver or amplifier outputs the linear PCM audio signals as surround audio signals).

Select this when playing a disc recorded with a sampling frequency of 48 kHz.

Select this when playing a disc recorded with a sampling frequency of 96 kHz.

Select this when playing a disc recorded with a sampling frequency of 192 kHz.

Select this to output audio signals without using the DRC function.

Select this to adjust the range between the loudest and softest sounds (dynamic range) for playback at average volume. Use this when it is hard to hear dialog or when watching movies at midnight.

Select to switch the DRC setting On/Off automatically according to the input audio signal from the disc.

En