03

Chapter 3

Getting Started

Making settings using the Setup Navigator menu

Be sure to perform these settings when using the player in the following situations.

•When you use the player for the first time.

•After Initial Setup format.

•After updating the player’s software.

Caution

•Before turning on the power, check that the connections between the player and other devices are correct. Also, turn on the power of the devices connected to the player before turning on the player’s power.

•When using a Pioneer Flat Screen TV or front projector compatible with the Control function, set Control to On on the connected device before turning on the player’s power.

Note

•When a Pioneer Flat Screen TV or front projector compatible with the Control function is connected to the player using an HDMI cable, the player is automatically set to the optimum picture quality for the connected device.

1Turn on the TV’s power and switch the input.

See the TV’s operating instructions for the details of operating the TV.

2Turn on the player’s power.Press  STANDBY/ON.

Check that the Setup Navigator menu is displayed.

If the Setup Navigator menu is not displayed

Press HOME MENU to display the Home Menu, select Initial Setup Setup Navigator

Start, then press ENTER.

24

3Start Setup Navigator.

Press ENTER.

•Setup Navigator starts.4Select the OSD language.

Use / to select, then press ENTER.

When a Pioneer Flat Screen TV that is compatible with Control function is connected to this player’s HDMI OUT terminal, language settings are imported from the Pioneer Flat Screen TV’s language settings before Setup Navigator begins.

5Select the appropriate output resolution for theconnected TV.

Use / to select, then press ENTER.

6Select the appropriate aspect for the connectedTV.

Use / to select, then press ENTER.

7Close the Setup Navigator menu.

Press ENTER.

•Setup Navigator finishes and the setting is stored.

•Press RETURN to go back to the previous screen.

En