Important
!Beforemaking a finalinstallation of the unit,
temporarilyconnect the wiringto confirm that
theconnections are correctand the system
workproperly.
!Useonly the parts included with the unit to
ensureproper installation.The use of un-
authorizedparts can causemalfunctions.
!Consultwith your nearest dealer if installation
requiresthe drillingof holes or othermodifica-
tionsof the vehicle.
!Installthe unit where it does not get in the dri-
vers way and cannot injure the passenger if
thereis asudden stop,like an emergency
stop.
!Whenmounting this unit, makesure noneof
theleads aretrapped betweenthis unit and
thesurrounding metalworkor fittings.
!Donot mountthis unitnear the heateroutlet,
whereit wouldbe affected byheat, ornear the
doors,where rainwatermight splash onto it.
!Beforedrilling any mountingholes always
checkbehind where youwant todrill the
holes.Do not drill intothe gasline, brake line,
electricalwiring orother important parts.
!If this unit installed in the passenger compart-
ment,anchor it securely so it doesnot break
freewhile the vehicleis moving,and causein-
jury or an accident.
!If this unit is installed under a front seat,
makesure itdoes not obstructseat move-
ment.Route all leads and cordscarefully
aroundthe slidingmechanism so theydo not
caughtor pinchedin themechanism and
causea short-circuit.
Installing this unit

Mounting with Velcrofasteners

Thoroughly wipe off the surface before affixing

the Velcrofasteners.

!If the Velcrofasteners (hard) adhere to the

car mat directly,you may install this unit

without using the Velcrofasteners (soft).

%Mount this unit using the Velcro fasten-

ers.

Velcro fastener (hard)
Car mat or chassis
Velcro fastener (soft)
This unit
Installation
En
12
Section
05