Pioneer CDJ-100S specifications Cueing, Fader Start Playback, Relay Play Using Two Players

ADVANCED OPERATIONS: SPECIAL DISC JOCKEY TECHNIQUES

Jog dial

Cueing

7Confirm a cue point (cue point sampler)

After setting a cue point, press and hold the CUE button.

ÖAs long as the CUE button is held depressed, the sound of the track at the cued point can be heard.

7Return to a cue point (back cue)

1.During playback, press the CUE button.

ÖThe player returns to the set cue point and en- ters standby mode.

2.Press the PLAY/PAUSE button (6 ).

ÖPlayback will begin instantly from the cue point.

7Modify a cue point (cue point adjust)

1.During playback, press the CUE button.

ÖThe player returns to the set cue point and en- ters standby mode.

2.Press the SEARCH buttons (1, Á ).

ÖThe cue point moves in 1-frame increments (broken sound will be reversed).

ÖThe cue point can also be changed by rotating the jog dial after pressing the SEARCH buttons (1, Á)

3.Press the CUE button.

ÖThe new cue point will be set at the point the CUE button is pressed.

Fader Start Playback

Acommercially available mini-plug cord can be used to connect this unit's CONTROL jack to one of the optional DJ mixers DJM-500 or DJM-300; when this is done, the player's CUE standby is automatically released when the DJ mixer's channel fader is raised, thus allowing instant playback start. The player’s fader start operation can also be used to produce cross-fader effects. Restoring the fader position returns the player to its cue point (back cue) automatically.

The following operations are performed on the DJ Mixer. For details regarding connections and operation, con- sult the Operating Instructions furnished with your DJ Mixer.

1Set CROSS FADER switch to ON.

2 Set FADER START switch to ON.

12

<DRB1232>

En

During fader start	Cotrol cables
	DJ Mixer DJM-300 or
	DJM-500
During relay play	Cotrol cable
DJ Mixer DJM-300 or DJM-500

3When “A” is in standby mode at cue point, move the CROSS FADER slider from right to left to automati-

cally start playback on “A”.

4When “B” is in standby mode at cue point, move the CROSS FADER slider from left to right to automati-

cally start playback on “B”. ( “A” will simultaneously be back-cued (returns to cue point)).

NOTE:

Fader start and relay play cannot be performed simulta- neously, since different control cable connections are re- quired.

Relay Play Using Two Players

Relay play can be performed by using a commercially available miniplug cord to connect the CONTROL jacks of this unit and another CDJ series CD player.

ÖSet both player’s auto cue function to ON (the AUTO CUE indicators will light in the displays).

ÖSet your audio mixer's fader control to its center po- sition.

1.Begin playback on the first player.

2.When the currently playing track ends, playback will begin automatically on the standby player.

3.The first player will enter cue standby mode at the beginning of the next track on its disc.

ÖBy repeating this operation, the two players can be used to perform continuous relay play.

ÖBy loading new discs on the standby player, you can construct a continuous program of whatever tracks you wish.

ÖBy setting a cue point on the standby player, you can perform relay to any desired cue point on the selected track (see page 10: Setting a Cue Point).

NOTE:

ÖRelay play may not operate properly if the audio out jacks on the two players are not connected to the same audio mixer.

ÖIf the power to one player is turned off during its play- back, the other player may begin playback.