Pioneer CDJ-100S Ordinary Cd Player Operations, Basic Operation, TRACK SEARCH buttons 4, ¢

BASIC OPERATION I

ORDINARY CD PLAYER OPERATIONS

Jog dial

Setting the Auto Cue function ON/OFF

Press and hold the TIME MODE/AUTO CUE button for one or more seconds to toggle the auto cue mode on and off. The auto cue function is turned on when the indicator light showing A.CUE is lit.

Playback Operations

These represent basic playback operations when the auto cue function is off (the display’s A.CUE indicator goes off).

To Pause Play

During playback, press the PLAY/PAUSE button (6).

ÖThe PLAY/PAUSE button’s indicator and CUE indica- tor will flash, and play will be paused.

ÖWhen the PLAY/PAUSE button is pressed again, play will resume and the button indicator will light stead- ily.

ÖBroken sound will still be audible during the standby mode; if you wish to stop all sound, lower the output sound volume on your audio mixer.

ÖWhen the unit has not been operated for 80 minutes or more in pause mode, the disc rotation stops auto- matically. In this instance, playback can be resumed by pressing the PLAY/PAUSE button.

Track Cueing

7 TRACK SEARCH buttons (4, ¢)

Press one of the TRACK SEARCH buttons (4, ¢).

ÖEach time the button is pressed, the track is cued in the direction corresponding to the arrow on the button (during playback of one track, to cue play- back to the beginning of the preceding track, press the 4 button twice).

ÖWhen the button is press down and held, cueing is continuous. If the button is held for two seconds or more, the cue speed increases.

ÖWhen the beginning of the first track (track 1) is reached, pressing the 4 button will cue to the last track.

ÖWhen the end of the disc's last track is reached, pressing the ¢ button will cue to the first track (track 1).

1.Insert disc.

ÖWith the disc's label surface upward, insert the disc into the front-panel's disc loading slot.

ÖWhen playing an 8 cm/3-inch disc, place the disc in a commercially available CD adapter before in- serting in the loading slot.

ÖLoad only one disc at a time.

CAUTION

Do not attempt to press a disc back into the slot when the EJECT indicator appears. Pressing a disc back into the slot while the EJECT indicator appears may cause the player to stop. In this case, press the EJECT button again and wait until the EJECT indicator goes out before reinserting the disc.

2.Play will begin automatically from track 1.

ÖIf the auto-cue function is set to off, playback will not stop after the first track ends but continue sequentially from the first track to the subsequent tracks.

ÖPlay stops automatically after the last track is played.

To Stop Play

Press the EJECT button.

ÖPlay will stop and the disc will be ejected.

ÖThe unit is not provided with a special stop button.

7Super-Fast Track Search

Rotate the jog dial while pressing one of the TRACK SEARCH buttons (4, ¢).

ÖWhile holding either one of the buttons depressed, rotate the dial in the direction corresponding to the direction you wish to skip; the unit will enter the high-speed skip mode, with the skip speed corresponding to the amount the dial is ignored.

ÖThe direction of skip is in accordance with the di- rection in which the jog dial is rotated. (the TRACK SEARCH button direction is released.)

ÖThe high-speed skip mode is canceled when the TRACK SEARCH button is released.

Fast-Forward / Fast-Reverse

7Operation using the SEARCH buttons

Press the SEARCH buttons (1, Á) during playback. Press and hold the Ábutton to fast forward the disc; press and hold the 1 button to do fast reverse.

7Super-Fast Search

Rotate the jog dial while pressing one of the SEARCH buttons (1, Á)

ÖHold down the button while turning the Jog dial in the direction you wish to search to enter fast forward or fast reverse mode.

ÖThe direction of the search is determined by the direction the Jog dial is turned. The direction of the SEARCH button is ignored.

ÖWhen you stop turning the Jog dial, the unit re- turns to playback mode.

ÖRelease the SEARCH button to exit this mode.

9

<DRB1232>

En