2Press the rotary selector, move the cursor to the library on the computer’s screen, then turn the rotary selector and select the track.
a
b
aLibrary
bCrates panel
3 Press the [LOAD] button to load the selected track onto the deck.
Operation
Playing tracks and outputting the sound
The following describes the procedure for outputting the channel 1 sound as an example.
!Set the volume of the devices (power amplifier, powered speakers, etc.) connected to the [MASTER OUT 1] and [MASTER OUT 2] terminals to an appropriate level. Note that loud sound will be output if the volume is set too high.
4 | a |
| |
5 |
|
b
6
c
7
d
8
9
e
4TRIM control
5EQ (HI, MID, LOW) controls
6FILTER control
7Headphones CUE button
8Channel fader
9Crossfader Assign Switch
AMASTER LEVEL control
BBOOTH MONITOR LEVEL control
CHEADPHONES MIXING control
DMASTER CUE button
ECrossfader
FHEADPHONES LEVEL control
GINPUT SELECT switch
HCrossfader curve selector switch
1Set the positions of the controls, etc., as shown below.
Names of controls, etc. | Position |
MASTER LEVEL control | Turned fully counterclockwise |
TRIM control | Turned fully counterclockwise |
EQ (HI, MID, LOW) controls | Center |
FILTER control | Center |
Channel fader | Moved forward |
Crossfader Assign Switch | [THRU] position |
INPUT SELECT switch | [PC] position |
f | g | h |
En 13
