Pioneer DEH-1200MP Installation, DIN front/rear mount, DIN Front-mount, DIN Rear-mount

Section

04Installation

Important

! Check all connections and systems before

final installation.

! Do not use unauthorized parts as this may

cause malfunctions.

! Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

! Do not install this unit where :

— it may interfere with operation of the vehi-

cle.

— it may cause injury to a passenger as a re-

sult of a sudden stop.

! The semiconductor laser will be damaged if it

overheats. Install this unit away from hot

places such as near the heater outlet.

! Optimum performance is obtained when the

unit is installed at an angle of less than 60°.

2Secure the mounting sleeve by using a screwdriver to bend the metal tabs (90°) into place.

Dashboard

Mounting sleeve

3Install the unit as illustrated.

Nut

60°

Screw

Firewall or metal support

Metal strap

DIN front/rear mount

This unit can be properly installed either from “Front” (conventional DIN front-mount) or “Rear” (DIN rear-mount installation, utilizing threaded screw holes on the sides of unit chassis). For details, refer to the following in- stallation methods.

!Use commercially available parts when in- stalling.

Screw (M4 8)

#Make sure that the unit is installed securely in place. An unstable installation may cause skip- ping or other malfunctions.

DIN Front-mount

1Insert the mounting sleeve into the dashboard.

For installation in shallow spaces, use the sup- plied mounting sleeve. If there is enough space, use the mounting sleeve that came with the vehicle.

DIN Rear-mount

1Determine the appropriate position where the holes on the bracket and the side of the unit match.

12 En