![](/images/new-backgrounds/1316753/31675311x1.webp)
Section
02
Operating this unit
Turning the unit off
1Press SRC/OFF and hold until the unit turns off.
Selecting a source
1Press SRC/OFF to cycle between:
TUNER
Adjusting the volume
1Turn SRC/OFF to adjust volume.
Note
When this unit’s blue/white lead is connected to the vehicle’s
Storing and recalling stations
You can easily store up to six stations as pre- sets.
%When you find a station that you want to store in memory, press one of the preset tuning buttons (1 to 6) and hold until the preset number stops flashing.
Stored radio station frequency can be recalled
by pressing the preset tuning button.
# Press a or b to recall radio station frequen- cies.
Function settings
%Press F (function) to select the function. After selecting, perform the following proce- dures to set the function.
Menu operations identical for function settings/audio adjustments/initial settings
Returning to the ordinary display
Canceling the initial setting menu
!Press BAND/ESC.
You can also cancel initial settings by holding down SRC/OFF until the unit turns off.
Tuner
Basic Operations
Selecting a band
1Press BAND/ESC until the desired band (F1, F2, F3 for FM or AM) is displayed.
Manual tuning (step by step)
1Press c or d.
Seeking
1Press and hold c or d, and then release.
You can cancel seek tuning by briefly pressing c or d.
While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you re- lease c or d.
LOCAL (local seek tuning)
Local seek tuning lets you tune in only those radio sta- tions with sufficiently strong signals for good recep- tion.
1Press a or b to turn local seek tuning on or off.
2Press c or d to set the sensitivity.
FM: LOCAL 1—LOCAL 2—LOCAL 3—LOCAL 4
AM: LOCAL 1—LOCAL 2
Larger setting number is higher level. The highest level setting allows reception of only the strongest stations, while lower settings let you receive pro- gressively weaker stations.
BSM (best stations memory)
BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength.
Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 1 to 6.
1Press a to turn BSM on.
The six strongest broadcast frequencies are stored in the order of their signal strength. To cancel the storage process, press b.
6 | En |