Pioneer DEH-1950 operation manual Built-in Player

Black plate (6,1)

Section

02Operating this unit

4To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

c or d.

# If you press and hold c or d you can skip sta- tions. Seek tuning starts as soon as you release the button.

Storing and recalling broadcast frequencies

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

Memorized radio station frequency can be re- called by pressing the preset tuning button.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.

1Press FUNCTION to select BSM.

2Press a to turn BSM on.

Six strongest broadcast frequencies will be stored in the order of their signal strength.

#To cancel the storage process, press b.

Built-in Player

#Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in memory.

#You can also use a and b to recall radio sta- tion frequencies assigned to preset tuning but- tons 1 to 6.

Playing a disc

1Insert a CD into the CD loading slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD has been inserted, press SOURCE

to select the built-in CD player.

# You can eject a CD by pressing EJECT.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Press FUNCTION to select LOCAL.

2Press a or b to turn local seek tuning on or off.

3Press c or d to set the sensitivity. FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

AM: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

2To perform fast forward or reverse, press and hold c or d.

3To skip back or forward to another track, press c or d.

Notes

!Read the precautions with discs and player on page 10.

!If an error message such as ERROR-11 is dis- played, refer to Error messages on page 10.

Repeating play

Repeat play lets you hear the same track over again.

1Press FUNCTION to select RPT.

2Press c or d to select the repeat range. DSC – Repeat all tracks

6 En

<CRD4146-A/N>6