Pioneer DEH-2000MP Setting the FM tuning step, Switching Auto PI Seek, Sound muting

	Section
Operating this unit	02

Setting the FM tuning step

Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on.

!The tuning step remains at 50 kHz during manual tuning.

1Press FUNCTION to select FM.

2Press c or d to select the FM tuning step.

Press c to select 50 (50 kHz). Press d to se- lect 100 (100 kHz).

Switching Auto PI Seek

The unit can automatically search for a differ- ent station with the same programming, even during preset recall.

1Press FUNCTION to select A-PI.

2Press a or b to turn the Auto PI seek on or off.

nected. If the ignition switch in your vehicle doesn’t have an ACC (accessory) position, it is possible depending on the connection method that when Power Save is off, the unit will draw power from the battery.

1Press FUNCTION to select SAVE.

2Press a or b to turn the power save on or off.

Multi language display setting

Text information such as title name, artist name or comment can be recorded on a com- pressed audio disc.

This unit can display them even if they are em- bedded in either European language or Rus- sian language.

!If embedded language and selected lan- guage setting are not consistent with each other, text information may not be dis- played properly.

!Some characters may not be displayed properly.

1 Press FUNCTION to select TITLE.

English

Switching the auxiliary setting

It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit.

1Press FUNCTION to select AUX.

2Press a or b to turn the auxiliary set- ting on or off.

Saving the battery consumption

Switching this function on enables you to save the consumption of battery power.

!Operations other than turning on the source are not allowed when this function is on.

Important

If the battery in your vehicle is disconnected the Power Save mode is canceled. Turn on Power Save again once the battery has been recon-

2Press c or d to select the language. EUR (European language)—RUS (Russian lan- guage)

Sound muting

Sound from this unit is muted automatically in the following cases:

!When a call is made or received using a cellular telephone connected to this unit.

!When the voice guidance is output from a

Pioneer navigation unit connected to this unit.

The sound is turned off, MUTE is displayed and no audio adjustments, except volume con- trol, are possible. Operation returns to normal when the phone connection or the voice gui- dance is ended.

En 13