| Section |
Operating this unit | 02 |
|
|
3To perform manual tuning, briefly press c or d.
4To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip sta- tions. Seek tuning starts as soon as you release the button.
Storing and recalling broadcast frequencies
%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.
Memorized radio station frequency can be re-
called by pressing the preset tuning button.
# Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in
memory.
# You can also use a and b to recall radio sta- tion frequencies assigned to preset tuning but- tons 1 to 6.
Tuning in strong signals
Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.
1Press FUNCTION to select LOCAL.
2Press a or b to turn local seek tuning on or off.
3Press c or d to set the sensitivity. FM: LOCAL
LOCAL 4
AM: LOCAL 1—LOCAL 2
The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.
!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.
1Press FUNCTION to select BSM.
2Press a to turn BSM on.
Six strongest broadcast frequencies will be stored in the order of their signal strength.
#To cancel the storage process, press b.
Built-in Player
Playing a disc
1Insert a CD into the CD loading slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD has been inserted, press SOURCE
to select the
# You can eject a CD by pressing EJECT.
2To perform fast forward or reverse, press and hold c or d.
3To skip back or forward to another track, press c or d.
Notes
!Read the precautions with discs and player on page 11.
!If an error message such as
English
En | 7 |