Section
02 Operating this unit
LCD display |
| Basic Operations | |
1 | 2 | Turning the unit on and | |
selecting a source | |||
|
|
3 4 5 6
1Main display section
Shows the various information such as band, play time, and other setting.
!Tuner
Band and frequency are displayed.
!
Erapsed play time is displayed.
!Audio and initial setup
Function names and setup status are dis- played.
2Preset number/track number indicator Shows the track number or preset number.
!If a track number 100 or more is selected, d on the left of the track number indica- tor will light.
3RPT indicator
Shows when repeat play is turned on.
4LOUD indicator
Appears in the display when loudness is turned on.
5Stereo (5) indicator
Shows when the selected frequency is being broadcast in stereo.
6LOC indicator
Shows when local seek tuning is on.
You can select a source you want to listen to. To switch to the
%Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources:
Notes
!In the following cases, the sound source will not change:
—When there is no disc in the unit.
—When the AUX (auxiliary input) is set to off (refer to page 10).
!AUX is set to on by default. Turn off the AUX when not in use (refer to Switching the auxili- ary setting on page 10).
!When this unit’s blue/white lead is connected to the vehicle’s
Adjusting the volume
%Use VOLUME to adjust the sound level.
Turning the unit off
%Press SOURCE and hold until the unit turns off.
Tuner
Listening to the radio
1Press SOURCE to select the tuner.
2Press BAND to select a band.
Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed.
6 | En |