Adjusting equalizer curves

Youcan adjust the currently selected equalizer
curvesetting as desired.Adjusted equalizer
curvesettings are memorized inCUSTOM.

Adjustingbass/mid/treble

Youcan adjust the bass/mid/treble level.
1 PressAUDIO to select BASS/MID/
TREBLE.
2 Pressaor bto adjust the level.
+6to –6is displayed as the level is increased
ordecreased.
#Toreturn to the normal display, press BAND.

Adjusting loudness

Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 PressAUDIO to select LOUD.
2 Pressaor bto turn loudness on or off.
#Youcan also turn loudness on or off by press-
ingand holding EQ.
3 Presscor dto select a desired level.
LOW(low)—HI (high)
#Toreturn to the normal display, press BAND.

Adjusting source levels

SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM tuner volume
level,which remains unchanged.
!TheAM tuner volume levelcan also be ad-
justedwith source level adjustments.
1 Comparethe FM tuner volume level
withthe level of the source you wish to ad-
just.
2 PressAUDIO to select SLA.
3 Pressaor bto adjust the source vo-
lume.
SLA+4 to SLA –4is displayed as the source
volumeis increased or decreased.
#Toreturn to the normal display, press
BAND.
Other Functions

Adjusting initial settings

Usingthe initial settings, you can customize
varioussystem settings to achieve optimal per-
formancefrom this unit.
1 PressSOURCE and hold until the unit
turnsoff.
2 PressSOURCE and hold until function
nameappears in the display.
3 PressFUNCTION to select one of the in-
itialsettings.
PressFUNCTION repeatedly to switch be-
tweenthe following settings:
Clock—AUX(auxiliary input)
Usethe following instructions to operate each
particularsetting.
#Tocancel initial settings, press BAND.
#Youcan also cancel initial settings by holding
downSOURCE until the unit turns off.

Setting the clock

Usethese instructions to set the clock.
1 PressFUNCTION to select clock.
2 Presscor dto select the segment of
theclock display you wish to set.
Pressingcor dwill select one segment of the
clockdisplay:
Hour—Minute
3 Pressaor bto set the clock.

Turningthe clock display on or off

Youcan turn the clock display on or off.
Operating this unit
En 9
English
Section
02