| Section |
Operating this unit | 02 |
|
|
3Press a or b to set the date and clock. Pressing a will increase the value of the se- lected segment. Pressing b will decrease the value of the selected segment.
Switching the warning tone
If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone will sound. You can turn off the warning tone.
English
Turning the off clock display on or off
If the off clock display is turned on, when the sources and the feature demo are off, the date and clock display appears on the display.
1Press FUNCTION to select OFF CLOCK.
2Press a or b to turn OFF CLOCK on or
off.
Setting the FM tuning step
Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on.
1Press FUNCTION to select FM STEP.
2Press c or d to select the FM tuning step.
Pressing c or d will switch the FM tuning step between 50 kHz and 100 kHz while AF or TA is on. The selected FM tuning step will ap- pear in the display.
Note
The tuning step remains at 50 kHz during manual tuning.
1Press FUNCTION to select
WARNING TONE.
2Press a or b to turn WARNING TONE on or off.
Switching the auxiliary setting
Auxiliary equipments connected to this unit can be activated individually. Set each AUX source to ON when using. About connecting or using auxiliary equipments, refer to Using the AUX source on page 25.
1Press FUNCTION to select AUX1/AUX2.
2Press a or b to turn AUX1/AUX2 on or
off.
Switching the dimmer setting
To prevent the display from being too bright at night, the display is automatically dimmed when the car’s headlights are turned on. You can turn the dimmer on or off.
1Press FUNCTION to select DIMMER.
2Press a or b to turn DIMMER on or off.
Switching Auto PI Seek
The unit can automatically search for a differ- ent station with the same programming, even during preset recall.
1Press FUNCTION to select AUTO PI.
2Press a or b to turn AUTO PI on or off.
En 23