Section |
|
|
|
|
03 |
| Available accessories |
|
|
|
|
|
|
|
| TV tuner | Introduction of advanced | ||
| Basic Operations | operations | ||
| % Press FUNCTION to select BSSM. | |||
| You can use this unit to control a TV tuner, | |||
| # To return to the channel display, press BAND. | |||
| which is sold separately. | |||
|
|
| ||
| For details concerning operation, refer to the | Note | ||
| TV tuner’s operation manual. This section pro- | |||
|
|
| ||
| vides information on TV operations with this | If you do not operate the function within about 30 | ||
| unit which differs from that described in the | seconds, the display is automatically returned to | ||
| TV tuner’s operation manual. | the channel display. | ||
1Band indicator
Shows which band the TV tuner is tuned to.
2Preset number indicator
Shows which preset has been selected.
3Channel indicator
Shows which channel the TV tuner is tuned.
1Press SOURCE to select the TV.
2Press BAND to select a band.
Press BAND until the desired band is dis- played, TV1 or TV2.
3To perform manual tuning, briefly press c or d.
The channels move up or down step by step.
4To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the channels until a broad- cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip broadcasting channels. Seek tuning starts as soon as you release the button.
Storing and recalling broadcast stations
If you press any of the preset tuning buttons 1 to 6, you can easily store up to six broadcast stations for later recall with the touch of a but- ton.
%When you find a station that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.
The number you have pressed will flash in the preset number indicator and then remain lit. The selected station has been stored in mem- ory.
The next time you press the same preset tun- ing button the station is recalled from mem- ory.
Notes
!Up to 12 stations, six for each of two TV bands can be stored in memory.
!You can use a and b to recall stations as- signed to preset tuning numbers P.CH01 to P.CH12.
Storing the strongest broadcast stations sequentially
1 Press FUNCTION to select BSSM.
32
En
