Section
02
Operating this unit
4Stereo (5) indicator
Shows when the selected frequency is being broadcast in stereo.
5Frequency indicator
1Press SOURCE to select the tuner.
2Press BAND to select a band.
Press BAND until the desired band is dis- played, FM1, FM2 for FM or MW/LW.
3To perform manual tuning, briefly press c or d.
The next time you press the same preset tun- ing button the radio station frequency is re- called from memory.
#Up to 12 FM stations, six for each of the two FM bands, and six MW/LW stations can be stored in memory.
#You can also use a and b to recall radio sta- tion frequencies assigned to preset tuning but- tons 1 to 6.
Introduction of advanced operations
4To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
c or d.
# If you press and hold c or d you can skip sta- tions. Seek tuning starts as soon as you release the button.
Note
Listening MW radio while connecting iPod to this unit may generate noise. In this case, disconnect iPod from this unit and noise is disappeared.
Storing and recalling broadcast frequencies
If you press any of the preset tuning buttons 1 to 6 you can easily store up to six broadcast frequencies for later recall with the touch of a button.
%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.
The number you have pressed will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory.
%Press FUNCTION repeatedly to switch between the following functions:
BSM (best stations
frequencies search)
# If MW/LW band is selected, you can only se-
lect BSM or LOCAL.
# To return to the frequency display, press
BAND.
# If you do not operate functions within about 30 seconds, the display is automatically returned to the ordinary display.
Storing the strongest broadcast frequencies
BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.
!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.
1Press FUNCTION to select BSM.
2Press a to turn BSM on.
Six strongest broadcast frequencies will be stored in the order of their signal strength.
#To cancel the storage process, press b.
10
En
