Milan Technology MIL-S3580 manual Desktop Mounting, Rack-mounted Installation

Desktop Mounting

1.Set the switch on a sufficiently large flat space with a power outlet nearby.

2.Make sure surface is clean, and dust free.

3.Remove adhesive backing from the rubber feet.

4.Apply the rubber feet to each corner on the bottom of the switch.

Figure 3-1. Attaching rubber feet on the bottom of the switch

CAUTIION:: Do not place objects on top of the switch.

Rack-mounted Installation

The MIL-S3580 comes with a rack-mount kit and can be mounted in an EIA standard sized, 19-inch rack. The switch can be placed in a wiring closet with other equipment.

Perform the following steps to rack mount the switch:

A.Position one bracket to align with the holes on one side of the switch and secure it with the smaller bracket screws. Then attach the remaining bracket to the other side of the switch.

Figure 3-2. Attach mounting brackets with screws

12