x Normal where the port is not mapped to a specific VLAN but can become a member through Dynamic VLAN registration. Dynamic VLANs are set when GVRP sets them. Unless GVRP is running, there is no registration of dynamic VLANs.

x Fixed registration maps a port to a specific or fixed VLAN. The network administrator can "fix" a VLAN to a specific port with this option. The port can also be set to another VLAN by dynamic VLAN registration.

x Forbidden ports cannot participate in the designated VLAN. They cannot be fixed members or members of dynamic VLANs. When set to forbidden, the port cannot communicate with any ports on this VLAN.

Once configured there are 3 possible states of the ports that show in the management menus.

S:shows a static registration of the port and GVRP is not running

D:the port has been registered to the specific VLAN by GVRP

C:the port has been registered to the specific VLAN by GVRP and it was also set to that VLAN by a network administrator

Note: A blank indicates that the port is not a member of the VLAN.

On the web browser the ports can be set as Normal, Fixed or Forbidden. The mapping of the 3 different configuration options on the console versus the web browser are shown below.

 

Console configuration

Web configuration

Normal

 

Normal

Fixed

F

Fixed

Forbidden

B

Forbidden

63

Page 63
Image 63
Milan Technology MIL-S3580 manual Console configuration Web configuration