Figure 3-25. Port Based VLAN Configuration Menu
Port Based VLAN needs to be set in the Switch Device Control Menu before any configuration in this menu takes effect. By default, the VLAN mode configuration for the switch is IEEE 802.1Q. Once set to Port Based VLANs, all ports are on the same VLAN by default. There can be up to 128 different port based VLANs configured. These VLANs can be overlapping which means that one port can belong to several different VLANs.
Select the VLAN entry to create, modify, or delete the VLAN group. Use <Space Bar> to check (join) port(s) to the VLAN group. When a port is joined to a VLAN, it appears on the menu screen as (X). If the () is blank, the port does not belong to that VLAN.
32
