
Connecting the unit | English |
When connecting speakers without using the internal amplifier
•If using this system, we recommend that this unit’s internal amp is turned off. For more details, refer to operation manual.
50 cm (20 in.)
1.5 m (4 ft. 9 in.) |
|
| 20 cm |
USB cable |
Connecting the unit | English |
iPod
Connect to separately sold USB device. | AUX jack (3.5 φ) | ||
Use a stereo mini plug | |||
Rear output | This product | ||
cable to connect with | |||
|
| auxiliary device. | |
Front output |
| Wired remote input | |
|
| ||
Antenna jack |
| ||
| adaptor can be connected | ||
Subwoofer output |
| ||
| (sold separately). | ||
| Fuse (10 A) | ||
Dock connector |
| ||
|
|
Interface cable
Yellow
Connect to the constant 12 V supply terminal.
To rear output
To front output
To subwoofer output
| Power amp |
| (sold separately) |
Connect with RCA cables | |
(sold separately) | Power amp |
| |
| (sold separately) |
| Power amp |
| (sold separately) |
Red
Connect to terminal controlled by ignition switch (12 V DC).
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean,
Yellow/black
If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.
Not used.
White Gray
System remote control
Blue/white
Connect to system control terminal of the power amp or
| |
Subwoofer |
|
Subwoofer
White/black Gray/black
Green Violet
Green/black Violet/black
| |
| |
Front speaker |
|
| |
| |
Rear speaker |
|
| |
Front speaker
Rear speaker