Pioneer DEH-P500UB installation manual Connecting the unit English

Connecting the unit	English	Connecting the unit	English	Connecting the unit	English	Connecting the unit	English
When not connecting a rear speaker lead to a subwoofer				When using a subwoofer without using the optional amplifier

	1.5 m (4 ft. 9 in.)
		20 cm
50 cm (20 in.)	USB cable	(7-7/8 in.)
	Connect to separately sold USB device.	AUX jack (3.5 φ)

	Rear output	This product	Use a stereo mini plug
iPod			cable to connect with
			auxiliary device.
	Front output		Wired remote input
	Antenna jack		Hard-wired remote control
			adaptor can be connected
	Subwoofer output		(sold separately).

Fuse (10 A) IP-BUS input (Blue)

To rear output

To front output

To subwoofer

	Power amp
	(sold separately)
Connect with RCA cables
(sold separately)	Power amp
	(sold separately)
	Power amp
	(sold separately)

50 cm (20 in.)	1.5 m (4 ft. 9 in.)
			20 cm
	USB cable		(7-7/8 in.)	AUX jack (3.5 φ)
	Connect to separately sold USB device.			Use a stereo mini plug
iPod	Rear output	This product		cable to connect with
				auxiliary device.
	Front output			Wired remote input
				Hard-wired remote control adaptor can
	Antenna jack			be connected (sold separately).

Subwoofer output

Dock connector

Interface cable

Yellow

Connect to the constant 12 V supply terminal.

IP-BUS cable

Multi-CD player (sold separately)

output

Fuse (10 A)	IP-BUS input (Blue)
Dock connector		Multi-CD player
	IP-BUS cable	(sold separately)

Interface cable

Blue/white

Connect to system control terminal of the power amp or auto-antenna relay control

Red

System remote control

terminal (max. 300 mA 12 V DC).

Connect to terminal controlled by ignition switch (12 V DC).

Orange/white

Connect to lighting switch terminal.

Black (chassis ground)

Connect to a clean, paint-free metal location.

White



Yellow/black

If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.

Gray



Blue/white

Connect to system control terminal of the power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC).

Perform these connections when using the optional amplifier.

Yellow/black

If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.

Yellow

Connect to the constant 12 V supply terminal.

Red

Connect to terminal controlled by ignition switch (12 V DC).

Front speaker

Left

Subwoofer (4 Ω)

White	Gray
		
			Front speaker
		
White/black	Gray/black		Right
Green	Violet
				Ω)
			Subwoofer (4
		
Green/black	Violet/black

Front speaker



Front speaker



	
Subwoofer

Subwoofer

Orange/white

Connect to lighting switch terminal.

When using a subwoofer of 70 W (2 Ω), be sure to connect

Left

White/black

Green

Gray/black

Violet

Right

 

with Violet and Violet/black leads of this unit.

Do not connect anything with Green and Green/black leads.

Rear speaker





Green/black





Violet/black

Rear speaker

	
Front speaker
	

Front speaker

Black (chassis ground)

Connect to a clean, paint-free metal location.

Note:

Green Violet

Not used.



Subwoofer (4 Ω)  2

With a 2 speaker system, do not connect anything to the speaker leads that are not connected to speakers.

	
Rear speaker
	

Rear speaker

Change the initial setting of this unit.

The subwoofer output of this unit is monaural.

Green/black Violet/black

