Adjusting initial settings

Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
1Function display
!Shows the function status.
1 Press SRC and hold until the unit turns
off.
2 Press MULTI-CONTROL and hold until
the initial setting menu appears in the dis-
play.
3 Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL to switch between the
functions in the following order.
Language select (language selection)
Calendar (calendar)Clock (clock)
Warning tone (warning tone)AUX1 (auxili-
ary input 1)AUX2 (auxiliary input 2)
Dimmer (dimmer)Brightness (brightness)
S/W control (rear output and subwoofer
controller)Mute (sound muting/attenua-
tion)Built-in AMP (power amp setting)
Demonstration (feature demo)
Reverse mode (reverse mode)Ever-scroll
(ever scroll)BT AUDIO (Bluetooth audio)
Pin code input (pin code input)
BT Version info. (Bluetooth version informa-
tion)
Use the following instructions to operate each
particular setting.
#BT AUDIO,Pin code input and
BT Version info. can be selected only when Blue-
tooth adapter (e.g., CD-BTB200) is connected to
this unit.
#To cancel initial settings, press BAND/ESC.

Selecting the display language

For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1 Use MULTI-CONTROL to select
Language select in the initial setting menu.
Refer to Adjusting initial settings on this page.
2 Press MULTI-CONTROL to select the lan-
guage.
Each press of MULTI-CONTROL selects lan-
guages in the following order:
EnglishFrançaisEspañol

Setting the date

The calendar display adjusted in this mode ap-
pears when the telephone source is selected
or sources and the feature demo are off.
1 Use MULTI-CONTROL to select Calendar
in the initial setting menu.
Refer to Adjusting initial settings on this page.
Calendar appears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the calendar display
you wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the calendar display:
DayMonthYear
As you select segments of the calendar dis-
play the segment selected will blink.
3 Push MULTI-CONTROL up or down to
set the date.
Pushing MULTI-CONTROL up will increase
the selected day, month or year. Pushing
MULTI-CONTROL down will decrease the se-
lected day, month or year.

Setting the clock

Use these instructions to set the clock.
Initial Settings
En
28
Section
04