Pioneer DEH-P5900IB Using ITS playlists, Creating a playlist with ITS programming, English

	Section
Available accessories	03

#If you do not operate functions except for ITS memo and TitleInput "A" within about 30 seconds, the display is automatically returned to the ordinary display.

Function and operation

Play mode, Random mode, Scan mode, Pause, Compression and TitleInput "A" op- erations are basically the same as that of the built-in CD player.

Function name	Operation
	Refer to Selecting a repeat play
	range on page 15.
	But the repeat play ranges you can
	select are different from that of the
	built-in CD player. The repeat play
	ranges of the multi-CD player are
Play mode	as below:
	! M-CD repeat – Repeat all
	discs in the multi-CD player
	! Track repeat – Repeat just the
	current track
	! Disc repeat – Repeat the cur-
	rent disc

Notes

!If you select other discs during repeat play, the repeat play range changes to

M-CD repeat.

!If you perform track search or fast forward/re- verse during Track repeat, the repeat play range changes to Disc repeat.

!After track or disc scanning is finished, nor- mal playback of the tracks will begin again.

!When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, you cannot switch to TitleInput "A". The disc title has al- ready been recorded on a CD TEXT disc.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selec- tions.

English

Random mode

Refer to Playing tracks in random

order on page 15.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to

Scan mode

Refer to Scanning folders and

tracks on page 15.

99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold be-

Pause

Refer to Pausing disc playback on

page 16.

Refer to Using compression and BMX on page 16.

Multi-CD player has DBE (dynamic bass emphasis) function instead

fore the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

1 Play a CD that you want to program.

Push MULTI-CONTROL up or down to select

the CD.

Compression of BMX.

ITS play mode

The settings can be switched as below:

COMP OFF—COMP 1—COMP 2

—COMP OFF—DBE 1—DBE 2

Refer to Using ITS playlists on this

page.

2 Use MULTI-CONTROL to select

ITS memo in the function menu.

3	Select the desired track by pushing
MULTI-CONTROL left or right.
4	Push MULTI-CONTROL up to store the

ITS memo

Refer to Using ITS playlists on this

page.

currently playing track in the playlist.

Memory complete is displayed and the cur-

TitleInput "A"

Refer to Entering disc titles on

page 16.

rently playing selection is added to your play-

list.

En 51