Pioneer DEH-P5900IB SIRIUS Satellite Radio tuner, Selecting a SIRIUS channel directly, English

	Section
Available accessories	03

SIRIUS Satellite Radio tuner

Basic Operations

You can use this unit to control a SIRIUS Satel- lite Radio tuner, which is sold separately. When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation man- ual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIR- IUS operation manual.

!With this unit, you can operate one addi- tional function: SIRIUS channel direct se- lection. Refer to Selecting a SIRIUS channel directly on this page.

1 2 3 4

5

1SIRIUS band indicator

2SIRIUS channel number indicator

3SIRIUS preset number indicator

4SIRIUS channel select setting indicator Shows what channel select setting has been selected. CH is displayed when

Channel number is selected, and CAT is dis- played when Category is selected.

5SIRIUS channel name

Shows the channel name of broadcast channel.

1Press SOURCE to select SIRIUS.

2Press BAND to select a SIRIUS band. Press BAND until the desired SIRIUS band is displayed, SR-1, SR-2 or SR-3.

3To perform tuning, push MULTI-CONTROL left or right.

The channels move up or down step by step. Channels that cannot currently be selected

are skipped, and the next channel is selected.

# If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num-

ber continuously.

# You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.)

Note

It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel.

Selecting a SIRIUS channel directly

When using the remote control, you can select the SIRIUS channel directly by entering the de- sired channel number.

1 Press DIRECT.

Channel number input display appears.

2Press 0 to 9 buttons to enter the desired

channel number.

# You can cancel the input number by pressing

CLEAR.

3Press DIRECT.

The SIRIUS channel of entered number is selected.

#After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

English

En 35