Pioneer DEH-P5900IB Initial Settings, Selecting the display language, Adjusting initial settings

Operating this unit

Initial Settings	Selecting the display language
Adjusting initial settings	For your convenience, this unit equips multi-
	ple language display. You can select the lan-
Using the initial settings, you can customize
	guage best suited to your first language.
various system settings to achieve optimal per-
formance from this unit.	1 Use MULTI-CONTROL to select
	Language select.
	2 Press MULTI-CONTROL to select the lan-
	guage.
	Each press of MULTI-CONTROL selects lan-
	guages in the following order:
	English—Français—Español
1
1 Function display	Setting the clock
Shows the function status.
1 Press SOURCE and hold until the unit	Use these instructions to set the clock.
turns off.	1 Use MULTI-CONTROL to select Clock.
2 Press MULTI-CONTROL and hold until	2 Push MULTI-CONTROL left or right to
Language select appears in the display.	select the segment of the clock display you
# You can also perform this operation by press-	wish to set.
ing and holding FUNCTION on the remote con-	Pushing MULTI-CONTROL left or right will se-
trol.	lect one segment of the clock display:
3 Turn MULTI-CONTROL to select one of	Hour—Minute
	As you select segments of the clock display
the initial settings.
	the segment selected will blink.
Turn MULTI-CONTROL to switch between the
functions in the following order:	3 Push MULTI-CONTROL up or down to
Language select (language selection)—Clock	put a clock right.
(clock)—Warning tone (warning tone)—
AUX1 (auxiliary input 1)—AUX2 (auxiliary	Note
input 2)—Dimmer (dimmer)—Brightness	You can match the clock to a time signal by
(brightness)—S/W control (rear output and
	pressing MULTI-CONTROL.
subwoofer controller)—Mute (sound muting/
	! If the minute is 00 to 29, the minutes are
attenuation)—Demonstration (feature demo)
	rounded down. (e.g., 10:18 becomes 10:00.)
—Reverse mode (reverse mode)—Ever-scroll
	! If the minute is 30 to 59, the minutes are
(ever scroll)—BT AUDIO (Bluetooth audio)—
	rounded up. (e.g., 10:36 becomes 11:00.)
Pin code input (pin code input)
Use the following instructions to operate each
particular setting.	Switching the warning tone
# You can also select the function by pressing	If the front panel is not detached from the
FUNCTION on the remote control.
	head unit within four seconds of turning off
# BT AUDIO and Pin code input can be se-
	the ignition, a warning tone will sound. You
lected only when Bluetooth adapter (e.g., CD-
	can turn off the warning tone.
BTB100) is connected to this unit.
# To cancel initial settings, press BAND.

Section

02

English

En 25