| Section |
Operating this unit | 02 |
|
|
!External unit refers to a Pioneer product (such as one available in the future) that, although incompatible as a source, enables control of basic functions by this unit. Two external units can be controlled by this unit. When two exter- nal units are connected, the allocation of them to external unit 1 or external unit 2 is automatically set by this unit.
!When this unit’s blue/white lead is connected to the vehicle’s
Adjusting the volume
%Use
Tuner
Basic Operations
1 2 3 4 5
6
1Band indicator
2Stereo (5) indicator
Shows when the selected frequency is being broadcast in stereo.
3LOC indicator
Shows when local seek tuning is on.
4Preset number indicator
5 Signal level indicator
Shows the radio wave strength.
6 Frequency indicator
1Press SOURCE to select the tuner.
2Press BAND to select a band.
Press BAND until the desired band is dis- played,
3To perform manual tuning, push
4To perform seek tuning, push and hold
The tuner will scan the frequencies until a broadcast strong enough for good reception is
found.
# You can cancel seek tuning by pushing
# If you push and hold
English
En 11