Pioneer DEH-P5900IB SIRIUS Satellite Radio tuner, Selecting a SIRIUS channel directly, English

	Section
Available accessories	03

SIRIUS Satellite Radio tuner

Basic Operations

You can use this unit to control a SIRIUS Satel- lite Radio tuner, which is sold separately. When the SIRIUS tuner is used together with this unit, some operations differ slightly from those described in the SIRIUS operation man- ual. This manual provides information on these points. For all other information on using the SIRIUS tuner, please refer to the SIR- IUS operation manual.

!With this unit, you can operate one addi- tional function: SIRIUS channel direct se- lection. Refer to Selecting a SIRIUS channel directly on this page.

1 2 3 4

5

1SIRIUS band indicator

2SIRIUS channel number indicator

3 SIRIUS preset number indicator

4 SIRIUS channel select setting indicator Shows what channel select setting has been selected. CH is displayed when

Channel number is selected, and CAT is dis- played when Category is selected.

5 SIRIUS channel name

Shows the channel name of broadcast channel.

1Press SOURCE to select SIRIUS.

2Press BAND to select a SIRIUS band. Press BAND until the desired SIRIUS band is displayed, SR-1, SR-2 or SR-3.

3To perform tuning, push MULTI-CONTROL left or right.

The channels move up or down step by step. Channels that cannot currently be selected

are skipped, and the next channel is selected.

# If you push and hold MULTI-CONTROL left or right, you can increase or decrease channel num-

ber continuously.

# You can also perform tuning from a desired channel category. (Refer to Selecting a channel in the channel category on the next page.)

Note

It may take a few seconds before you can hear anything while this unit acquires and processes the satellite signal when you change the source to SIRIUS tuner or select a channel.

Selecting a SIRIUS channel directly

When using the remote control, you can select the SIRIUS channel directly by entering the de- sired channel number.

1Press DIRECT.

Channel number input display appears.

2Press 0 to 9 buttons to enter the desired

channel number.

# You can cancel the input number by pressing

CLEAR.

3Press DIRECT.

The SIRIUS channel of entered number is selected.

#After entering the number input mode, if you do not perform an operation within about eight seconds, the mode is automatically canceled.

Introduction of advanced operations

1Press MULTI-CONTROL to display the main menu.

FUNCTION, AUDIO and ENTERTAINMENT appear on the display.

English

En 35