Pioneer DEH-P640 Using the equalizer, Using balance adjustment, Recalling equalizer curves

Section

06Audio Adjustments

•If you switch the SFEQ mode, the H.P.F. func- tion is automatically switched off. By switch- ing the H.P.F. function on after selecting the SFEQ mode, you can combine H.P.F. function with SFEQ function.

Using the equalizer

The graphic equalizer lets you adjust the equal- ization to match car interior acoustic character- istics as desired.

Using balance adjustment

You can select a fader/balance setting that pro- vides an ideal listening environment in all occu- pied seats.

1 Press AUDIO to select Fad.

Press AUDIO until Fad appears in the display.

•If the balance setting has been previously adjusted, Bal will be displayed.

2Press 5 or ∞ to adjust front/rear speaker balance.

Each press of 5 or ∞ moves the front/rear speaker balance towards the front or the rear.

• Fad F15 – Fad R15 is displayed as the front/rear speaker balance moves from front to rear.

• Fad 0 is the proper setting when only two speakers are used.

• When the rear output setting is Rear SP:S.W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 34.

3Press 2 or 3 to adjust left/right speaker balance.

When you press 2 or 3, Bal 0 is displayed. Each press of 2 or 3 moves the left/right speaker balance towards the left or the right.

• Bal L9 – Bal R9 is displayed as the left/right speaker balance moves from left to right.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display	Equalizer curve
SUPER BASS	Super bass
POWERFUL	Powerful
NATURAL	Natural
VOCAL	Vocal
CUSTOM1,2	Custom1,2
FLAT	Flat

•CUSTOM1 and CUSTOM2 are adjusted equal- izer curve.

•A separate CUSTOM1 curve can be created for each source. (The Built-in CD player and Multi-CD player are set to the same Equalizer Curve Adjustment setting automatically.)

•If you make adjustments when a curve other than CUSTOM2 is selected, the equalizer curve settings are memorized in CUSTOM1.

•A CUSTOM2 curve can be created common to all sources.

•If you make adjustments when the CUSTOM2 curve is selected, the CUSTOM2 curve is updated.

•When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve.

28En