Pioneer DEH-P640 operation manual Audio Adjustments, Introduction of audio adjustments, Izer

Audio Adjustments

Introduction of audio adjustments

1

1AUDIO display

Shows the audio adjustments status.

Press AUDIO to display the audio function names.

Press AUDIO repeatedly to switch between the following audio functions:

Fad (balance adjustment)—EQ(equalizer curve adjustment)—Bass(bass)—Treble(treble)— Loud (loudness)—Sub-W1(subwoofer1)/Non Fad (non fading output on/off)—Sub-W2(subwoofer2)/Non Fad (non fading output set- ting)—HPF(high pass filter)—SLA(source level adjustment)

•When the subwoofer controller setting is only

S.W Control:EXT, you cannot switch the Sub-W1. (Refer to page 34.)

•You can select the Sub-W2only when Subwoofer output is switched on in the Sub-W1.

•When the subwoofer controller setting is only S.W Control:EXT, you can switch the non fading output on/off mode. (Refer to page 34.)

•You can select the non fading output setting mode only when non fading output is switched on in the non fading output on/off mode.

•When selecting the FM tuner as the source, you cannot switch to SLA.

•To return to the playback display, press

BAND/ESC.

Section

06

Note	English
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.

Setting the sound focus equal-	Español
Clarifying the sound image of vocals and instru-
izer
ments allows the simple staging of a natural,
pleasant sound environment.
Even greater listening enjoyment will be
obtained if seating positions are chosen care-	Deutsch
fully.
• FRT1 boosts the treble on the front output and
the bass on the rear output.
FRT2 boosts the treble and the bass on the front
output and the bass on the rear output. (The
bass boost is the same for both front and rear.)
For both FRT1 and FRT2 the H setting provides a	Français
mode.
more pronounced effect than the L setting.
1 Press SFEQ to select the desired SFEQ
FRT1-H(front1-high) —FRT1-L(front1-low) —
FRT2-H(front2-high) —FRT2-L(front2-low) —
CUSTOM (custom) —SFEQ OFF (off)	Italiano
in the display.
2 Press 2 or 3 to select the desired position.
Press 2 or 3 until the desired position appears
LEFT (left) —CENTER(center) —RIGHT(right)
Notes	Nederlands
• If you adjust the bass or treble, CUSTOM
memorizes an SFEQ mode in which the bass
and treble are adjusted for personal prefer-
ence.

En 27