Audio Adjustment
Loudness Adjustment (LOUD)
The Loudness function compensates for deficiencies in the low and high sound ranges at low volume. You can select a desired Loudness level.
1.Press the AUDIO button and select the Loudness mode (LOUD) in the Audio Menu.
2. Switch the Loudness function ON/OFF with the 5/° but- tons.
“ 
”
3. Select the desired level with the 2/3 buttons.
LOW += MID += HI
Subwoofer Output (SUB.W)
When a Subwoofer is connected, switch Subwoofer output ON. Initially, Subwoofer out- put is OFF.
The Subwoofer output phase can be switched between normal, or 0˚ (“NOR”), and reverse, or 180˚(“REV”). 0˚ is the default phase.
Note:
•When the Subwoofer Controller setting is “S/W CTL:EXT”, you cannot switch the Subwoofer ON/OFF mode. In this case, this setting is not necessary. (Refer to page 41.)
•Select the OFF setting when you do not want the Subwoofer to operate.
1.Press the AUDIO button and select the Subwoofer ON/OFF mode (SUB.W) in the Audio Menu.
2. Switch the Subwoofer output ON/OFF with the 5/° buttons.
“ 
”
3. Change the phase of Subwoofer output with the 2/3 buttons.
33
