Slip hot cue

1 Press the [SAMPLER MODE] button.

Set the hot cue mode.2Set the hot cue.3Press the [SLIP] button.

The mode switches to the slip mode.

4During playback, press and hold a [HOT CUE/SAMPLER] button.

Playback starts from the position at which the hot cue was set. Playback continues while the [HOT CUE/SAMPLER] button is being pressed. Normal playback continues in the background while the hot cue is playing.

5Release your finger from the [HOT CUE/SAMPLER] button.

Playback starts from the position reached in the background.

!To cancel the slip mode, press the [SLIP] button again.

3 Press the [RELOOP/EXIT (GRID CLEAR)] button.

Looping is canceled and playback starts from the position reached in the background.

!To cancel the slip mode, press the [SLIP] button again.

Slipping using a loop in a loop slot1 Press the [SLIP] button.

The mode switches to the slip mode.

2Press the [LOOP SELECT (GRID LOCK)] button and select the loop to be played.3Press the [RELOOP/EXIT (GRID CLEAR)] button.Loop playback starts.Normal playback continues in the background even during loop playback.4 Press the [RELOOP/EXIT (GRID CLEAR)] button again.

Looping is canceled and playback starts from the position reached in the background.

!To cancel the slip mode, press the [SLIP] button again.

Slip braking

1 Turn the [BRAKING SPEED ADJUST] control.This adjusts the speed at which the track stops from the play mode.

!When using slip braking, adjust the [BRAKING SPEED ADJUST] con- trol to around the 9 o’clock position so that playback stops slowly.

2 Press the [SLIP] button.

The mode switches to the slip mode.

3During playback, press the [PLAY/PAUSE f(STUTTER)] button.

Playback slowly stops while the button is being pressed. Normal playback continues in the background while playback is slowly stopping.

4 Press the [PLAY/PAUSE f(STUTTER)] button again.

Playback starts from the position reached in the background.

!To cancel the slip mode, press the [SLIP] button again.

Auto slip looping

1 Press the [SLIP] button.

The mode switches to the slip mode.

2 Turn the [AUTO LOOP(GRID SLIDE)] control.Select the auto loop beat.3 Press the [AUTO LOOP (GRID SLIDE)] control.

A loop with the specified number of beats is set and loop playback starts. Normal playback continues in the background during loop playback.

4 Press the [AUTO LOOP(GRID SLIDE)] control again.

Looping is canceled and playback starts from the position reached in the background.

!To cancel the slip mode, press the [SLIP] button again.

Manual slip looping

Creating a loop and slipping it

1 Press the [SLIP] button.

The mode switches to the slip mode.

2Press the [LOOP IN (GRID SET)] button, then press [LOOP OUT (GRID TAP)] button.

Loop playback starts.

Normal playback continues in the background even during loop playback.

20En

Slip reverse

1 Press the [SLIP] button.

The mode switches to the slip mode.

2Press the [CENSOR (REVERSE)] button while pressing the [SHIFT] button.The track is played in the reverse direction.Normal playback continues in the background even during reverse playback.

3Once again, press the [CENSOR (REVERSE)] button while pressing the [SHIFT] button.

Reverse playback is canceled and playback starts from the point reached in the background.

!To cancel the slip mode, press the [SLIP] button again.

Starting playback using the fader (Fader Start)

Starting playback using the crossfader

1Set the [FADER START] switch to [ON].2Move the crossfader.

Set to the edge opposite the side on which the channel you want to use with the fader start function is set.

3 Set the temporary cue point.Playback pauses at the temporary cue point.

!If a temporary cue point is already set, press the [CUE] button to move the playback position back to that point.

4 Move the crossfader.Playback starts.

!If you set the crossfader back to the original position, the player immediately returns to the temporary cue point and pauses playback (Back cue).