Opening or removing the cover exposes you to possible electrical shock or other danger. Contact a Pioneer authorized service representative for repairing this product (refer to the enclosed Service & Support Card).
Damage Requiring ServiceUnplug the unit and refer servicing to qualified service personnel in the following situations:
%When the power cord, plug, or chassis is damaged.%If liquid has been spilled, or objects have fallen into the product.%If the product has been exposed to rain or water.%If the product does not operate normally when the operating instruc- tions are followed. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and can require extensive work by a qualified tech- nician to restore the unit to its normal operation.
%When the product exhibits a distinct change in performance – this indicates a need for service.
Check that there are no irregularities with the AC adapter or power plug, then insert the power plug into the specified position of the AC adapter using the specified procedure until a click is heard. For details, see Mounting the power plug on page 4.
If there are irregularities with the AC adapter or power plug, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.
!Do not use this unit with a coin, paper clip or other metal object stuck between the AC adapter and power plug. Doing so could cause a short circuit, leading to fire or electric shock.
!When mounting the AC adapter on a wall outlet, make sure there is no space between the AC adapter and the wall outlet. Faulty contact or a coin, paper clip or other metal object getting stuck in the space could cause a short circuit, leading to fire or electric shock.
Coin, paper clip or other metal object| Side | Top |
!The power plug could come detached from the AC adapter and remain in the power outlet if someone trips on the AC adapter’s power cord or if something hits the AC adapter. If this happens, remove the power plug remaining in the outlet with dry hands, hold- ing it as shown on the diagram below and without touching metal parts. Do not use any tools to remove it.
Do not touch metal parts.
Mounting the power plug
Slide the power plug along the guide rails in the AC adapter unit as shown on the diagram below, then press in until a click is heard.
PUSH | PUSH |
|
While pressing the [PUSH] button on the AC adapter unit, slide the power plug away from the adapter as shown on the diagram below to remove it.
Once the power plug is mounted, there is no need to remove it.PUSH
PUSH
Power plug
This product comes with the types of power plugs shown below. Use the appropriate power plug for the country or region you are in.
1 2 3
4 5
1Type 1 (for North America)2Type 2 (for Europe)3Type 3 (for the UK)4Type 4 (for Australia)5Type 5 (for Thailand)