1MIC LEVEL control (page 13)
Adjusts the sound level output from the [MIC] channel.
2EQ (HI, LOW) controls (page 13)
Adjusts the sound quality of the [MIC] channel.
3OFF, ON, TALK OVER selector switch (page 13)
Turns the microphone on/off.
4ON/OFF button (page 15)
Switches the MIDI function on and off.
5START/STOP button (page 15)
Sends the MIDI start/MIDI stop signals.
6FADER START
These turn the fader start function on/off.
7MONO SPLIT, STEREO selector switch (page 12)
Switches how the monitor sound output from the headphones is distributed.
8MIXING control (page 12)
This adjusts the monitor volume balance of the sound of channels for which the [CUE] button is pressed and the sound of the [MASTER] channel.
9LEVEL control (page 12)
Adjusts the sound level output from the headphones.
AInput selector switches (page 12)
Selects the input source of each channel from the components connected to this unit.
BChannel Level Indicator (page 12)
Displays the sound level of the respective channels before passing through the channel faders.
CTRIM control (page 12)
Adjusts the level of audio signals input in each channel.
DEQ/ISO (HI, MID, LOW) controls (page 12)
These adjust the sound quality of the respective channels.
ECUE button (page 12)
Presses the [CUE] button(s) for the channel(s) you want to monitor.
FChannel Fader (page 12)
Adjusts the level of audio signals output in each channel.
GCROSS FADER ASSIGN (A, THRU, B) selector switch (page 12)
Sets the output destination of each channel to [A] or [B].
HCrossfader (page 12)
Outputs audio signals assigned by the crossfader assign switch corresponding to the curve characteristics selected by [CROSS FADER] (Crossfader Curve Selector Switch).
IMASTER LEVEL control (page 12)
Adjusts the audio level output from the [MASTER1] and [MASTER2] terminals.
JMaster Level Indicator (page 12)
Displays the audio level output from the [MASTER1] and [MASTER2] terminals.
KBALANCE control (page 13)
Adjusts the left/right balance of the sound output from the [MASTER1] terminals, etc.
LMONO, STEREO selector switch (page 13)
Switches the sound output from the [MASTER1] terminals, etc., between monaural and stereo.
MBOOTH MONITOR control (page 13)
Adjusts the level of audio signals output from the [BOOTH] terminal.
NEQ CURVE (ISOLATOR, EQ) selector switch (page 12)
Switches the function of the [EQ/ISO (HI, MID, LOW)] controls.
OCH FADER (
, 
) selector switch (page 12)
Switches the channel fader’s curve characteristics.
PCROSS FADER (
, 
,
) selector switch (page 12)
This switches the crossfader curve characteristics.
QMain unit display
RBEAT c, d buttons (page 15)
Set the beat fraction for synchronizing the effect sound.
STAP (ENTER) button
—TAP: When the BPM measurement mode is set to [TAP], the BPM is input manually by tapping the button with a finger (page 15).
—ENTER: Used to change this unit’s settings (page 21).
TSETUP (WAKE UP) button (page 21)
—SETUP: Displays the [USER SETUP] or [CLUB SETUP] screen.
—WAKE UP: Cancels the auto standby mode.
UAUTO/TAP button (page 14)
Switches the BPM measurement mode.
VCOLOR FX selector buttons (page 14)
These turn the SOUND COLOR FX and BOOST COLOR FX effects on and off.
WBOOST button (page 14)
Switches the SOUND COLOR FX and BOOST COLOR FX functions.
XCOLOR control (page 14)
Adjusts the quantitative parameter of the SOUND COLOR FX and BOOST COLOR FX effects.
YBeat effect selector switch (page 15)
Switches the BEAT EFFECT effect type.
ZEffect channel selector switch (page 14)
Switches the channel to which the BEAT EFFECT and the SOUND COLOR FX/BOOST COLOR FX effects are applied.
ATIME control (page 15)
Adjusts the BEAT EFFECT’s time parameter.
BLEVEL/DEPTH control (page 15)
Adjusts the BEAT EFFECT’s quantitative parameter.
CON/OFF button (page 15)
Turns the BEAT EFFECT function on/off.
Do not pull on the channel fader and crossfader knobs with excessive force. The knobs have a structure by which they cannot be pulled off easily. Pulling the knobs strongly may result in damaging the unit.
Operation
En 11